SILICONE SEALS BETTER
Replace that leaky gasket in the E61 group head of your espresso machine with this neutral and aroma-free silicone gasket. The soft consistency creates a better seal and makes installation even easier. If your portafilter locks into place too far to the right due to a worn group or portafilter, then this is the gasket to make your life easier. This thicker gasket is designed to fit worn groups and/or portafilters in E61 group heads.
- 8.5mm thicker design matches standard E61 group head gaskets but solves the problem of group/portafilter wear
- Heat resistant silicone
- Forms tight seal without tightening the portafilter as much as a standard gasket
- Fits all espresso machines with E61 group heads that have wear in the group head and/or portafilter
- 73mm x 57mm x 8.5mm Blue Silicone Gasket
- Petroleum based grease can degrade silicone. Use a silicone lubricant instead, ideally a food safe white grease.
- Use the portafilter with the basket removed to install the gasket to avoid breakage
Use to replace the old gasket on your E61 espresso machine.
Please note that although the gaskets are strong under compression, you should never use a sharp tool like a screwdriver to install them. This may tear the silicone.
caflatte belman bellmann bell man ballman expresso moka bialetti percolator grosche pylano duna bodum chambord alessi paper filter filter handle gasket