SIBARIST Booster 45 (for flat bottom brewers)

SBRST-B45
Regular price $27.00 CAD
Sale price $27.00 CAD Regular price $0.00

The SIBARIST Booster 45 is a revolutionary way of brewing coffee, a tool to increase the strength and drawdown flow of your flatbed dripper brews. Sitting between your filter and the brewer, it was developed with Matt Winton (2021 World Brewers Cup Champion) for the best contact surface vs free space ratio and pattern.

Free Canadian shipping over $75
Free USA shipping on orders over $100
365-day Hassle Free Return Policy
Warranty and Support on everything
Everything we sell is Barista Approved
Earn points towards your next order

Earn [points_amount] when you buy this item.

Add a bag of fresh coffee:

  • Description
  • Specs
  • Method
  • GIVE YOUR FLAT BOTTOM A BOOST

    The SIBARIST Booster 45 is a revolutionary way of brewing coffee, it is a tool to increase the extraction strength and the drawdown flow of your flatbed dripper brews.

    Sitting between your filter and the brewer, it drastically increases the contact points under the bed, right where we want to have most of your coffee flow through the filter, in a very even way, which increases drawdown speeds, and the potential for higher extractions without channeling.

    The results are brews without bitterness or dryness, even at very high extraction yields allowing you to grind finer, to get sweeter, richer and better cups without changing your brewer, just by adding the booster under your paper.

    The Booster has been developed together with Matt Winton (2021 World Brewers Cup Champion) to reach the best contact surface vs free space ratio and pattern.

    About the Booster 45, Matt Winton.

    "When I first started brewing with flatbed brewers, I was never able to get the results other people spoke about with fine grind, high extraction brews - they always turned out bitter - and I couldn't understand why. I asked around with a lot of people and someone put me on to a blog post about putting a mesh sieve underneath the filter in a Stagg brewer by Johnathon Gagne. I decided to try this out and was amazed at the difference it made! I started to play with diameters, and hole sizes in the mesh and realised that the magic in this technique wasn't in sitting the paper off the brewer, but in increasing the contact points of the paper to the mesh and increasing flow this way.

    Together with Sibarist we found a great mesh size that dramatically enhances flow, and eliminates clogging when brewing dense, light roast coffees! I now was able to brew recipes like other people had suggested, without getting the bitter results I had before, due to the even, faster flow, and no choking!

    I use this mesh now on all my flat bed brewers, Orea, Stagg, Kalita, April, to totally open up the flow, and give consistent results that don't choke! I've used it with many different paper types to great effect with all, Kalita, Sibarist FAST, Sibarist B3, April etc. It works great to improve the brewers in all these cases.

    Even if we do brew a really slow draining coffee with a no-bypass brew, we have increased flow and still don't have bitter results in the end, just higher extractions, but no choking and uneven extractions!"

    • Suitable for flatbed drippers with 45mm diameter bed (most of the flat bed drippers, like Orea V3, Kalita 155 & 185, Fellow, April, etc.) in combination with any flatbed filter.
    • Material: Stainless Steel AISI 304 with food grade gold plating.
  • HOW TO BREW USING THE BOOSTER

    1. Wash with soap and hot water before the first use.
    2. Place the Booster inside the flatbed dripper, ensuring that sits on the bottom in a leveled and flat position parallel to the dripper bottom.
    3. Place a coffee filter inside the dripper.
    4. Rinse the filter ensuring that the bottom of the filter is in contact with the Booster.
    5. Add coffee and brew.

    HOW TO CLEAN

    1. Let the brewing set up cool down to room temperature.
    2. Remove the filter and the Booster from your dripper. Ensure that you have the Booster, it could be on the dripper bottom or stuck to the paper filter.
    3. Rinse it with hot water.

Customer Reviews

Based on 6 reviews
67%
(4)
33%
(2)
0%
(0)
0%
(0)
0%
(0)
S
Shu (Ontario, Canada)
Actually Works!

My brew on Orea v4 is a lot more consistent within the brew, I feel like the extraction for each coffee particle is a lot more even with the Booster, resulting in a less astringent cup with finer grounds. Solid, worth the pricetag!

A
A. (British Columbia, Canada)
Better value

they reduce the price about $5 which makes it even better value.

D
Daniel C. (California, United States)
Solid addition

If you don't have an Orea, get the V4 and this should not be a necessity. If you have a V3 and notice clogging with orea filters and the negotiator, this will help reduce clogging and allow for a more consistent and steady flow like an origami.

A
A. (British Columbia, Canada)
Amazing

It makes brewers like Orea V3 even more consistent by lowering the chance of clogging. Really enjoy using it!

K
Kelly (Ontario, Canada)

Not sure if it really changes the taste profile of my brew but it does decrease clogging a bit, even with finer grinds.

S
Stephen (Quebec, Canada)
Interesting

Not sure how much this really does. I have noticed a little more clarity in my brews, but I don't know of there's some bias in there. You do need to be careful, this sticks to the filter and have almost thrown it out twice already.

Eight Ounce Coffee Calgary Showroom
shop in person

Visit Our Calgary Showroom

Open seven days a week

Newest Coffee Arrivals

View all